Ok,
you have installed Win 98 SE on at least one computer, tested the MODEM
on the ICS gateway PC and it works on the Internet, built and tested
your NetBIEU network, shared your printers and shared and mapped you
disk drives. Everything is working and your Control Panel Network
Configuration looks something like the one to the right.
To simplify things, I would suggest disconnecting all of the computers
from the LAN except the one which will serve as the ICS gateway and
one other computer.
Install another copy of TCP/IP to bind it to your network adapter.
Just like before when you installed NetBIEU, click add, select protocol,
select Microsoft and TCP/IP, and click OK.
You may want to right-click the Client for Microsoft Networks, select
Properties, and temporarily reconfigure it for Quick Logon so the
computer does not try to connect to the mapped drives on the computers
you have disconnected from the network.
Ok,
you have installed Win 98 SE on at least one computer, tested the MODEM
on the ICS gateway PC and it works on the Internet, built and tested
your NetBIEU network, shared your printers and shared and mapped you
disk drives. Everything is working and your Control Panel Network
Configuration looks something like the one to the right.
To simplify things, I would suggest disconnecting all of the computers
from the LAN except the one which will serve as the ICS gateway and
one other computer.
computer does not try to connect to the mapped drives on the computers
you have disconnected from the network.